Energy Related Terms Explained
Below are some terms you may encounter while researching energy related products, heating and efficiency:
AFUE (annual fuel utilization efficiency): an efficiency rating that measures the efficiency with which gas and other fossil-fuel-burning appliance use their dominant fuel source over an complete heating season. It does not take into account the efficiency with which any part of the system, such as a furnace fan motor, uses electricity. AFUE is expressed as a percentage that indicates the average number of Btu worth of heating comfort provided by each Btu worth of fuel consumed by the system. for example, a gas furnace with an AFUE of 80% would provide 0.8 Btu of heat for every Btu of natural gas it burned.
Air infiltration: the introduction, usually unintentional, of unconditioned outdoor air into a mechanically heated and/or cooled building. Air infiltration can occur by any opening in the home’s structure, including seams where walls meet other walls, window or door frames, or chimneys; holes where wires or pipes penetrate walls, floors or ceilings/roofs; and between the loose-fitting meeting rails of double-hung windows or a door bottom and door threshold. It is one of the major causes of unwanted heat gain and loss, and personal discomfort in buildings.
Alternating Current (AC) – An electric current that reverses its direction at regular intervals or cycles; In the U.S. the standard is 120 reversals or 60 cycles per second; typically abbreviated as AC
Amp – short for “ampere” – this measures the amount of electricity moving by a wire. Most household appliances use 15 or 20 amps of strength. Amps are what give electricity its “shock.”
Biomass Fuel: Any organic (plant or animal) material which is obtainable on a replaceable basis, including agricultural crops and agricultural wastes and residues, wood and wood wastes and residues, animal wastes, municipal wastes, and marine plants
BTU (British thermal unit): a measurement of the energy in heat. It takes one Btu of heat to warm one pound of water by 1° Fahrenheit. Btu can be used either to define an air conditioner’s cooling capacity (i.e., the number of Btu of heat that can be removed by the system) or a furnace’s heating capacity (i.e., the number of Btu of heat that can be supplied by the system).
Chemical Energy – Energy stored in a substance and released during a chemical reaction such as burning wood, coal, or oil.
Combustion – Chemical oxidation accompanied by the generation of light and heat.
Conduction is the move of heat by substantial objects such as glass, dry wall, brick and other building materials. The greater the difference between the outdoor and indoor temperatures, the faster conduction can occur, increasing a building’s energy gain or loss.
Convection is the move of heat to or from a substantial surface via a gas or liquid current. Where home heat loss and gain are concerned, heat convection is caused by air (gas) currents that carry heat from your body, furniture, interior walls and other warm objects to windows, floors, ceilings, exterior walls and other cool surfaces.
Conversion- A number that translates units of one measurement system into corresponding values of another measurement system.
Cord of Firewood: a firmly stacked pile of wood logs measuring 4′ x 4′ x 8′ (128 cubic feet).
Daylighting is the technique of using natural light from windows, skylights and other openings to supplement or replace a building’s artificial lighting system. When applied properly, daylighting can reduce lighting costs. When applied improperly, however, it can not only rule to inappropriate light levels but can also raise the building’s cooling costs by introducing high levels of solar heat into the interior of the building. Also see SOLAR GAIN to see how sunlight can affect heating costs.
Direct Current – An electric current that flows in only one direction by a circuit, as from a battery.
Efficiency is the degree to which a certain action or level of work can be effectively produced for the least expenditure of effort or fuel. BTU of energy consumed (input) x efficiency = BTU output.
Energy: The ability to do work or the ability to move an object. Electrical energy is usually measured in
kilowatthours (kWh), while heat energy is usually measured in British thermal units (Btu).
Energy Efficiency – Refers to activities that are aimed at reducing the energy used by substituting technically more progressive equipment, typically without affecting the sets provided. Examples include high-efficiency appliances, efficient lighting programs, high-efficiency heating, ventilating and air conditioning (HVAC) systems or control modifications, efficient building design, progressive electric motor drives, and heat recovery systems.
Emission- A release or something that is given off; generally used in regard to discharges into the air. Or, releases of gases to the air from some kind of human activity (cooking, driving a car, etc). In the context of global climate change, they consist of greenhouse gases (e.g., the release of carbon dioxide during fuel combustion).
Heat Content – The gross heat content is the number of British thermal units (Btu) produced by the combustion, of a quantity of gas under certain with air of the same temperature and pressure as the gas, when the products of combustion are cooled to the initial temperature of gas and air and when the water formed by combustion is condensed to the liquid state.
Kilowatt-hour (kWh): 1000 watts used for one hour – or any combination of energy multiplied by time that is equivalent to that rate of electrical consumption, such as one watt used for 1000 hours, 10 watts used for 100 hours, or 50 watts used for 20 hours. For example, a 100-watt light bulb left on for five hours each day would consume one kWh every two days. Kilowatt-hour is the dominant measure on which U.S. electric companies base most customer billing.
Load calculate is series of studies performed to determine the heating or cooling requirements of your home. An energy load examination uses information such as the square footage of your home, window and door areas, insulation quality and local climate to determine the heating and cooling capacity needed by your furnace, heat pump or air conditioner.
Mercaptan – An organic chemical compound that has a sulfur like odor that is additional to natural gas before dispensing to the consumer, to give it a definite, unpleasant odor (smells like rotten eggs). This serves as a safety device by allowing it to be detected in the air, in situations where leaks occur.
Methane -A colorless, flammable, odorless hydrocarbon gas (CH4) which is the major part of natural gas. It is also an important source of hydrogen in various industrial processes. Methane is a greenhouse gas.
Operating Cost is the day-to-day cost of operating an appliance, based on energy use.
Payback period is the amount of time it takes to unprotected to a complete return on an investment. for example, if a high-efficiency direct vent gas fireplace costs $1000 more than a purely decorative fireplace but would save $500 a year in gas usage, the payback period is 2 years.
Propane (C3H8) – A typically gaseous straight-chain hydrocarbon. It is a colorless paraffinic gas that boils at a temperature of -43.67 degrees Fahrenheit. It is extracted from natural gas or refinery gas flows.
Radiation is a method of heat move in which heat is transmitted from surface to surface via infrared groups. Radiant heat warms the surfaces it touches without increasing the temperature of the air by which it travels. All warm bodies radiate infrared energy.
R-value is a measurement of a material’s ability to resist heat move. Insulation products are rated according to the R-value. The higher its R-value, the greater the product’s ability to resist heat flow will be.
Solar Gain is the heat that builds up inside a structure as a consequence of sunlight that enters by transparent or translucent surfaces, such as windows, and is converted to heat after remarkable other surfaces inside the building.
Space Heating – The use of energy to generate heat for warmth in housing units using space-heating equipment. The equipment could be either the dominant or secondary source of heating.
Thermal Energy – The total possible and kinetic energy associated with the random motions of the molecules of a material.
Thermostat – A device that adjusts the amount of heating and cooling produced and/or distributed by automatically responding to the temperature in the ecosystem.
Watt: a unit of electric strength. The amount of strength required by electric appliances is expressed in watts. Watt-hour is a unit of electric energy, equal to one watt used over a period of one hour.
Volt (V) – The volt is the International System of Units (SI) measure of electric possible or electromotive force. A possible of one volt appears across a resistance of one ohm when a current of one ampere flows by that resistance. Reduced to SI base units, 1 V = 1 kg times m2 times s-3 times A-1 (kilogram meter squared per second cubed per ampere).
Voltage – The difference in electrical possible between any two conductors or between a conductor and ground. It is a measure of the electric energy per electron that electrons can acquire and/or give up as they move between the two conductors. This is how electricity gets from the strength plant to your house: high-voltage transmission lines carry the electricity under greater pressure to carry it long distances, while lower-voltage strength lines serve individual homes and businesses.
*Article contributed by Karen Duke, Victorian Fireplace Shop